Tilta Smart V Mount Battery Baseplate (ARCA)
Tiltaing Smart V Mount Battery Baseplate (ARCA) was specially designed for use with the Tilta Canon R5C Camera Cage.
This smart V-Mount battery base plate is connected to the camera cages via an ARCA connection.
This battery board has (2) 14.8V P-Tap ports, (1) 5V USB-C port and (1) 60W USB-C PD port which allows the battery board to adjust the voltage required for the accessory it is connected to .
This allows you to power your camera or accessories because you do not have to rely solely on regulated power cables to ensure that your device gets the right voltage.
The height of this battery base plate can be adjusted to accommodate V-mounted batteries in different sizes and the 15 mm LWS standard distance means that the battery plate can be removed from the base plate and mounted with rods if needed.
The supplied USB-C cable clamp allows you to attach the supplied USB-C cable to the battery panel, creating a more secure connection and preventing accidental disconnection.
This base plate is compatible with our Full Camera Cage for the Canon R5C and any camera body or cage that can be connected to the included ARCA Standard Quick Release Plate.
The Tiltaing Smart V Mount Battery Baseplate (ARCA) sells for $ 169 USD, but is currently available to pre-order at a discounted early bird price of 152.10 USD and it is scheduled to begin shipping on July 4th.
If you do not like the idea of making your camera too high, you can use it Tiltaing Smart V Mount Battery Plate – Black instead.
Full camera holder for Canon R5C
The Full camera cage has been designed to provide protection for the Canon R5C while expanding the mounting options if you need to attach various accessories.
The cage has an ARRI Rosette Connection, two cold shoe receivers and NATO Rail connections on the upper and left side of the cage.
These connections are good alternatives for mounting one of Tilta’s optional side handles of type IV / VI or our compact NATO top handle.
The cage also has several ¼ ”-20 mounting points with locating pins, several M3 threads and integrated slots for a shoulder strap.
The optional adjustable top handle can be attached to quickly switch between horizontal and vertical shooting configurations.
The cage is connected to the camera body via a ¼ ”-20 screw and uses an extra contact point via a locating pin to prevent the camera from moving inside the cage.
The built-in silicone cushion helps to hold the camera body in place while protecting it from scratches that can be caused by the cage.
The base of the cage also provides a couple of mounting options to secure the system to various quick coupling plates and it naturally supports Tiltas Power Supply Baseplate Type III and LWS Baseplate
The base plate allows you to easily access the battery compartment and also has a slot for an included magnetic screwdriver.
The included clamp bracket connects to the side of the cage and allows you to secure the optional HDMI to Micro HDMI adapter and an optional USB-C cable. This accessory helps prevent these cables from coming loose when shooting and provides extra protection for the ports on the camera body. This can be especially useful when using an external recorder as a loose cable can very likely ruin a shot if it is accidentally disconnected.
The included lens mount attaches to the front of the cage via M3 screws and provides additional support for an RF to EF lens mount adapter. This provides an extra point of contact between your cage and the lens adapter that helps create a more secure connection and limits any offsets in the image that may be caused by following focus systems.
Tilta Full camera Cage for Canon R5C weighs only 182.5g.
It’s selling for $ 99 USD, but it’s currently available to pre-order at a discounted price for early $ 89.10 and it is scheduled to begin shipping on July 4th.
Above you can see some of the extra accessories that are also available.
Camera holder for Canon R5C Basic Kit
The Camera holder for Canon R5C Basic Kit is based on Full Camera Cage.
In addition to the complete camera cage, EF mounting adapter and HDMI clamp, you also get the TILTANG Quick Release handle and an HDMI to Micro HDMI adapter.
The camera holder for the Canon R5C Basic Kit sells for $ 169, but it is currently available to pre-order at a discounted price early on 152.10 USD and it is scheduled to begin shipping on July 4th.
#Tilta #Camera #Cage #accessories #Canon #R5C #News #shooter